Photo: RAU

Fit for the future with five-axis push

With a new CHIRON FZ 16 S five axis machining center, the production technology service provider Rau AG from Bülach near Zurich is systematically continuing its success story in the automated production of precision parts.

read time: 1 min read this article on one page
The new CHIRON FZ 16 S five axis CNC machining centre. From left to right: Ruedi Schalch, technical consulting/sales at CHIRON in Switzerland and Herbert Wagner, COO and division manager of production at Rau AG. Picture: maschinenbau
The new CHIRON FZ 16 S five axis CNC machining centre. From left to right: Ruedi Schalch, technical consulting/sales at CHIRON in Switzerland and Herbert Wagner, COO and division manager of production at Rau AG. Picture: maschinenbau

Rau was partner in the development of the FZ 16 S and is using the machine for a new project for precision parts in optimal color measuring systems. To find out how the machining center proves itself in the flexible, fully-automatic production of large quantities of between 100 and 100,000, see the March edition of the Swiss industry magazine (german).

back to: FZ/DZ 25: The new standard for large componentscontinue: CHIRON MILL 3000 extends KENNAMETAL's range of services

Table of contents speedfactor 01/2020