Six-sided milling and turning in one set-up: MT 733 one plus

Machining all six sides in one working cycle and completely milling and turning the workpiece at just one center: This is what STAMA's MT 733 series is all about. The MT 733 one plus for the flexible and precise complete machining of chuck parts had its world premiere at EMO.

Better complete machining: Based on this principle, STAMA developed the MT 733 series for complex components and materials that were difficult to machine. The MT 733, built with a portal design as all other models in this series, one plus could be seen in live operation. Equipped with real-time tool monitoring, linear direct drive on the Y-axis, a 20,000 milling spindle and integrated automation via H portal loaders, the MT 733 one plus, in live operation, carried out simultaneous five-axis machining of toothings using with a 55% milling ratio and a 45% turning ratio on a stainless steel workpiece, and of high-precision spherical shapes. A convincing performance for a successful first-part good-part strategy.

Gerhard Ulmer, Sales Director at STAMA, explains the strengths of the new machine platform:

 STAMA MT 733 one plus in the variation for chuck parts with diameters up to 250 mm. Good for the complete machining of complex components and materials that are difficult to machine.
STAMA MT 733 one plus in the variation for chuck parts with diameters up to 250 mm. Good for the complete machining of complex components and materials that are difficult to machine.